Title
HEARING - Planning and Building Department, Planning Division, submitting for approval to amend recorded Subdivision Map G-49 Lot 7 to reduce a non-buildable setback from 20-feet to 10-feet along the two frontages, Trade Way and Product Drive, on property identified by Assessor’s Parcel Number 109-401-002 located on the west side of Product Drive approximately 700 feet south of the intersection with Durock Road in the Cameron Park area, and staff recommending the Board of Supervisors take the following actions:
1) Find Parcel Map Amendment P-C21-0001 amending Subdivision Map G-49 (Lot 7) is Categorically Exempt from the requirements of CEQA pursuant to Section 15305-Minor Alterations to in Land Use Limitations; and
2) Approve Parcel Map Amendment P-C21-0001 amending Subdivision Map G-49 (Lot 7) based on the Findings and subject to the Conditions of Approval as presented. (Supervisorial District 2).
FUNDING: Property owner-funded recording of Subdivision Map Amendment.
Body
DISCUSSION / BACKGROUND
Subdivision Map Amendments are required to be reviewed and approved by the original hearing body. The subject parcel was created by Subdivision Map “Barnett Business Park” G-49 (Staff Memo Exhibit H), recorded in May 1986 after approval by the Board of Supervisors. The recorded map imposed easements on the parcel (Lot 7) including a 20-foot non-buildable setback adjacent to both Trade Way and Product Drive which are along the southern and eastern property lines. The setbacks are described on the recorded map as five-feet on both sides of all side lot lines, and the rear ten-feet of lots in this subdivision, and twenty-foot building setback and a twenty-foot slope easement contiguous to all streets, roads, drives, and courts shown hereon, or five-feet beyond the top of cut or toe of fill, whichever is larger.
The applicant is requesting an amendment to the recorded map to reduce the 20-foot front setback to 10-feet for the purpose of building a rockery reta...
Click here for full text